Clutch Cross Shaft
Clutch Cross Shaft
 |
 Corvette 68 81 Clutch Cross Shaft Linkage Original  US $90.00
|
 GM 1968 1972 Chevy Chevelle Stick Shift Linkage Setup Clutch Brake Pedal Z Bar US $82.99
|
 58 62 Corvette Clutch Cross Shaft GM Chevrolet Z Bar With Spring Bracket 3732881 US $75.00
|
 67 69 Camaro Big Block ONLY Clutch Bellcrank Z Bar Cross Shaft US $52.95
|
 68 72 GTO M T Clutch Cross Shaft Swivel Assembly US $52.95
|
 1955 55 CHEVROLET CHEVY CLUTCH CROSS SHAFT Z BAR US $44.95
|
 67 69 Camaro Clutch Bellcrank Z Bar Cross Shaft Sm Blk US $42.95
|
 NOS 42 46 47 48 DeSoto Dodge Plymouth Chrysler Clutch Pedal Cross Shaft Mopar US $39.99
|
 1967 1972 Chevrolet Truck 3996513 NOS 10 PEDAL CROSS SHAFT CLUTCH PUSH ROD US $34.99
|
 NOS GM Corvair FABRIC WASHER CLUTCH CROSS SHAFT US $29.99
|
 908081 WILLYS CLUTCH CROSS SHAFT SUPPORT TO TRANS US $29.99
|
 55 Chevy Clutch Cross Shaft Z Bar Original Style NEW US $29.95
|
 56 Chevy Clutch Cross Shaft Z Bar Original Style NEW US $25.95
|
 57 Chevy Clutch Cross Shaft Z Bar Original Style NEW US $25.95
|
 56 57 Chevy Clutch Cross Shaft NEW 1956 1957 Chevrolet US $24.95
|
 New 1957 Chevrolet Clutch Cross Shaft US $24.95
|
 56 57 chevy clutch cross shaft new US $24.50
|
 55 56 57 Chevy Clutch Push Rod to Cross Shaft US $19.95
|
 1955 57 Chevrolet Clutch Cross Shaft Bolt Bushing Kit US $15.95
|
 1955 1956 1957 Chevy Clutch Pedal Cross Shaft Sleeve Bolt US $14.95
|
 GM MANUAL CLUTCH CROSS SHAFT or Z BAR FRAME STUD NICE US $14.81
|
 55 56 57 Chevy Clutch Cross Shaft Bushing Kit NEW US $13.95
|
 55 56 57 Chevy Clutch Cross Shaft Bushing Kit NEW US $12.95
|
 55 56 57 CHEVY NEW CLUTCH CROSS SHAFT BOLT BUSHING US $12.95
|
 1955 56 57 Chevy Clutch Pedal Cross Shaft Bushiing All US $11.95
|
 Cross Shaft For Clutch Cable 1946 1964 New VW Beetle VW Bug VW Ghia US $10.95
|
Wheels wont move on a 9 inch ford rear end?
I have a 1981 bronco with a 9 inch rear end. I was in the woods, dropped the clutch and heard a loud pop. Now only the drive shaft spins and tires don't. I removed the carrier and noticed i did not break the cross pin in the mini spool. If i turn the yoke with my hand the gears move. The housing is cracked by the bearing seen from what would be the back of the axle. the yoke bearing i was told. but was told that wouldnt play a factor. Any help would be great!
if the rear end housing is cracked where the yoke goes in the front of rear end housing the yoke is attached to the pinion gear good chance the pinion is snapped this happens from time to time however there are several things
this could be the only sure way to find out is tear it down
1776cc 1967 VW Beetle