Carter Carburetor Fuel
Carter Carburetor Fuel
 |
 63 Early Corvette GAS LID w ROLLER LATCH cap door wheel used original  US $375.00
|
 1966 66 1967 67 Mustang 200 Carter Carburetor Fuel Pump US $79.95
|
 Chevy Corvette Vintage Carter WCFB AFB Carburetor Fuel Filter Original US $49.00
|
 66 71 Mopar 426 Hemi Cuda Carter AFB Carburetor Fuel Line Fittings US $47.85
|
 FUEL STRAINER CAP for 1924 1925 1926 1927 DRH 0 RX 0 NASH CHEVROLET CARBURETOR US $40.00
|
 INSULATOR FOR SMALL WCFBTEA POT CARBURETORSSTOPS HEATSAVE CARBSAVE FUEL US $34.00
|
 66 71 Mopar 426 Hemi Cuda Carter AFB Front Carburetor Fuel Line Fitting US $30.00
|
 NOS 1937 47 Hudson FUEL PUMP US $29.99
|
 CARTER CARBURETOR CO FUEL PUMP US $24.99
|
 66 71 Mopar 426 Hemi Cuda Carter AFB Rear Carburetor Fuel Line Fitting US $20.00
|
 CARTER FUEL BOWL ASSEMBLY hotrod carburetor 4 barrel mopar truck ford 2146397 US $20.00
|
 Vintage Carter YF Carburetor Off 1955 Nash Rambler Hudson Gas Fuel US $12.99
|
 5 8 20 Fuel Inlet Fitting Carter Rochester Carburetor US $11.35
|
 NEW CARTER CARBURETOR FUEL FILTER GAS GLASS BOWL BRACKET TIGHTENER CHEVY FORD US $9.99
|
What else can i do to a 406 sbc to get more HP?
have an 84 Chevy K20 LWB with a 4' lift and 35' tires. I want a little bit of both worlds with HP and Torque. Got the truck with the engine freshly rebuilt already and just wanted some advice and ideas to get it going a little better. Specs on engine are:
1970 Chevy 4 bolt main 400 cubic inch 509 Casting
Bored .030 over (makes it a 406 cubic inch)
Flat Top pistons 9.5 to 1 compression ratio
Comp Cams Magnum camshaft (270 H)
Weiand Stealth aluminum dual plane intake manifold
Edelbrock 600cfm carburetor
Milodon oil pan
GM performance parts valve covers
Carter high volume fuel pump
Hedman Ceramic coated headers
I use the truck for daily driver and mudding as well. I like to have some speed of the line if possible just for fun. Just looking for any ideas to improve the engine.
A bigger carb will help in both the HP and TQ department. Also factory heads are pretty much junk except for vortec heads. Any of the aftermarket heads will give a large improvement in power over factory castings.
How to rejet a Carburetor, 125cc Slide/CV Type